Shipping marks are the short block of letters and numbers printed on every export carton, crate or pallet so that anyone handling it can tell whose it is, where it goes and which package of the consignment it is. The core mark has four lines: the buyer's initials, a reference number, the destination and a package number such as 3/40. Everything else on the box, weight, origin, arrows and umbrellas, is supporting information.
Getting them wrong rarely stops a ship, but it stops cargo. A carton that does not match the paperwork gets pulled aside at the warehouse, the consolidation station or customs, and a mislabelled pallet in a shared container can end up at the wrong port. This guide walks through the standard format, what each line means, the marks that are mandatory for certain cargo, and worked examples you can adapt.
What Shipping Marks Mean on an Export Package
The German Insurance Association's cargo handbook, the Transport Information Service, splits complete package marking into three parts, and the split is the clearest way to think about it.
The shipping mark identifies the package: who it is for, which order it belongs to, where it is going and which number it is in the consignment. The information mark describes the package: country of origin, net and gross weight, dimensions. The handling instructions tell people and machines how to treat it: this way up, fragile, keep dry, sling here.
Only the first part travels onto the documents. The shipping mark is copied into the commercial invoice, the packing list and the bill of lading, so a warehouse clerk can hold a carton in one hand and the paperwork in the other and see that they agree. When people search for shipping marks meaning, this is the answer: the mark is the link between the physical box and its documents.
The Standard Shipping Mark, Line by Line
The international reference is UN/CEFACT Recommendation 15, "Simpler Shipping Marks", published by the UN Economic Commission for Europe. It defines a Standard Shipping Mark of four elements, in a fixed order, shown both on packages and in documents. Any element that is unnecessary for a shipment may be left out.
Line 1: Initials or abbreviated name of the buyer
The consignee or buyer appears as initials or a short name, not a full name and address. The recommendation suggests that exporter and importer agree on one abbreviation and use it on every shipment between them. Full addresses belong on rail and road consignments, where conventions require them, but not on ocean cartons.
Line 2: Reference number
One number only: the shipment, order or invoice number, whichever the seller and buyer agreed on. Recommendation 15 asks for it to be as brief as possible and to drop labels like "Order No." and dates, because every extra character is a chance to mistype it on a document.
Line 3: Destination
The port or place of final destination should always be shown. Where cargo is transshipped, the transshipment port can be added with VIA, for example NEW DELHI VIA BOMBAY. In multimodal transport the recommendation says to show only the final destination, so the operator can choose the route and the goods are not held for clearance at an intermediate port named on the box.
Line 4: Package number
The running number and, where known, the total: 1/25, 2/25 and so on to 25/25. On documents, 1/25 means packages 1 to 25. Prefixes such as "P/No." are unnecessary.
Shipping Marks Examples You Can Adapt
Recommendation 15 includes a comparison worth seeing. The complicated version of one mark ran to a full company name, a contract number, an import licence number, "PACKAGE NO.1 OF 25", net and gross weights, dimensions, the contractor's name and "MADE IN THE UNITED KINGDOM". The simplified version carried the same identification in four lines:
ABC
1234
BOMBAY
1/25
Here is how the same pattern looks across three common situations.
A single-buyer FCL shipment
A full container for one buyer needs the least. The cartons only have to be told apart from each other and matched to the packing list.
HMT
PO 88412
ROTTERDAM
17/120
An LCL carton sharing a container
In a consolidated container your cartons sit beside other shippers' freight, and they are stripped and sorted at a warehouse on arrival. Here the mark does real work: clear initials and a reference the receiving station can match fast. If you ship this way, the trade-offs in our guide to LCL shipping explain why mixed cargo is where marks matter most.
KLV
INV 2026-311
AUCKLAND
4/9
A transshipment or inland destination
When goods are discharged at one port and continue to an inland city, the TIS example shows destination and port as separate lines: PITTSBURGH, then VIA NEW-YORK. Use VIA only for ocean transshipment; on a multimodal booking, show the final place alone. A transshipped box also changes ships on the way, and once the carrier names the connecting vessel you can add it in Primo Nautic and follow both legs rather than only the first.
Information Marks: Weight, Dimensions and Origin
Information marks sit below the shipping mark, separated from it, and are not copied into documents as part of the mark.
Gross weight. Recommendation 15 promotes showing gross weight in kilograms whenever it helps safe handling, written simply as "462KG" without a "GROSS WEIGHT" label. The TIS handbook goes further: from 1,000 kg gross, packages must be marked with their weight, and lower thresholds are recommended to make handling easier.
Dimensions. TIS states dimensions in centimetres. Recommendation 15 favours weight and does not promote other dimensions on the package, so treat dimensions as useful for crates and heavy pieces rather than every carton.
Country of origin. Recommendation 15 would prefer to drop extra official details from packages, but many governments still require origin marking, and that rule wins. In the United States, Part 134 of the customs regulations governs it. Under 19 CFR 134.22, when an article itself is exempt from marking, the outermost container in which it reaches the buyer must show the country of origin, and a container bearing a US importer's address must carry a phrase such as "Contents made in France" close to that address.
What to leave off. Recommendation 15 advises against showing the sender's name and address on packages where it raises the risk of pilferage. A recognisable brand on the outside of a carton tells thieves exactly what is inside.
Handling Marks and Pictograms
Handling instructions use the pictograms standardised in ISO 780, which covers graphical symbols for handling and storing packages and excludes dangerous goods. TIS lists among them fragile, use no hooks, this way up and keep away from heat. Pictograms beat words because they need no translation between the loading port and the destination.
The IMO, ILO and UNECE Code of Practice for Packing of Cargo Transport Units, issued by the IMO as circular MSC.1/Circ.1497, sets the practical rules:
- Symbols should be black, stencilled on the package or printed on a label, on a white panel if the package colour hides black.
- Avoid red, orange and yellow unless a regulation requires them, so the marks are not confused with dangerous goods labels.
- The usual symbol height is 100, 150 or 200 mm, adjusted to the package.
- Position symbols correctly, because a misplaced arrow or sling mark tells handlers the wrong thing.
TIS adds one rule that is easy to forget: use only the handling instructions the goods actually need. A carton covered in every symbol teaches handlers to ignore all of them.
Marks That Are Mandatory for Some Cargo
Two kinds of marking are not optional extras. They are conditions for the cargo to move at all.
Dangerous goods
Under the UN Model Regulations on the Transport of Dangerous Goods, each package shows the proper shipping name and the UN number preceded by "UN". The letters and number must be at least 12 mm high, with smaller sizes allowed only for small packages. Hazard labels come on top of that, so confirm the cargo's class before you design the carton.
ISPM 15 on wooden pallets and crates
Solid wood packaging crossing borders must be treated and stamped under ISPM 15. According to Australia's agriculture department, the mark carries the IPPC symbol, a two-letter ISO country code for where the wood was treated, a unique certification number traceable to the treatment provider, and a treatment code: HT for heat treatment, MB for methyl bromide, DH for dielectric heat or SF for sulphuryl fluoride. Your shipping marks go on the cargo, not inside that stamp's border.
Shipping Marks on Cartons: Placement and Printing
A correct mark is useless if nobody can read it in a dim container. TIS gives clear placement rules:
- Mark at least two sides of each package; all four sides make handling noticeably easier.
- On rough-sawn timber, letters should be at least 20 mm high.
- The marking colour must contrast with the package, and stencils are preferred to handwriting.
- Erase old markings completely before reusing a box or crate.
For boards, TIS also accepts plywood, plastic or metal plates fixed firmly to the package, with weatherproof glue on plywood. Printed labels work on cartons as long as they are legible and durable, because a label that peels off in a humid hold leaves an anonymous box.
Print the marks before the cartons are palletised. Once a pallet is stretch-wrapped, the side marks on inner cartons disappear, so the pallet itself needs its own mark on the outside with the range of carton numbers it holds.
Matching Marks to the Packing List and Bill of Lading
The marks only work if they match the documents character for character. TIS warns that marking at variance with the shipping documents can draw objections from customs, and Recommendation 15 builds the whole system on the same mark appearing on packages and in documents.
In practice the packing list is where the match is made. Each line of the list carries the package number range, the mark and the contents, so a 4/9 carton can be found and opened in minutes. Our sample export packing list shows where the marks column sits. The same block then goes into the "marks and numbers" field of the shipping instructions, and from there onto the bill of lading.
Once the bill of lading is issued, the shipment has a vessel name and a voyage, and the marks have done their job until arrival. That is the point where tracking the ship replaces checking cartons. Primo Nautic lets you search that vessel by name, IMO or MMSI number and follow it with the Cargo Shipment purpose, which keeps updates precise and logistics-focused. Its dual ETA, the captain's reported arrival beside an AI-calculated one, and its delay notifications tell you when the cartons you marked will be ready for the destination warehouse to check against the packing list.
Key Takeaways on Shipping Marks
The standard shipping mark is four short lines: buyer initials, one reference number, the destination and a package number. Keep it short, keep it in that order, and copy it exactly into the invoice, packing list and bill of lading.
Information marks such as gross weight and country of origin sit below it, separated, and follow the destination country's rules. Handling pictograms follow ISO 780 and should be used only where the goods need them. Dangerous goods and wooden packaging carry marks that are conditions of carriage, not courtesy.
Print clearly on at least two sides, in a contrasting colour, and match every package to its document line. A carton that reads the same as its paperwork moves through every warehouse and customs check on the way without anyone needing to ask about it.



